| Customization: | Available |
|---|---|
| Application: | Motor, Machinery, Agricultural Machinery |
| Hardness: | Hardened Tooth Surface |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
DETAILS OF SHG/SHF HARMONIC REDUCER
|
|
1.The wave generator is installed in the shaft of motor. A ball bearing with thin-walled construction is fitted onto the outer periphery of the oval cam. The entire structure is oval. The inner ring of the bearing is fixed onto the voal cam and the outer ring elastically deforms through a ball.
|
|
2.The circular spline is the inner gear of the rigid body which is equipped with the gear with the size of the flexspline, and the number of gears is more than that of the flexspline. It is usually fixed in a gear box.
|
|
3.The flexspline is a cup-like elastic metal part with thin wall thickness. Teeth are cut into the outer periphery of the opening of the cup.
|
|
4.The flexsplinebears a large alternating load and the requirements for the fatigue strength, processing and heat treatment of the material of the flexspline are relatively high.
|
|
5.In the process of harmonic transmission, the meshing of tooth and tooth is surface contact, and the number of meshing teeth (overlap coefficient) is much more, so the load of per unit area is small and the bearing capacity is higher than that of other transmission forms.
|
){kind=link}